Lyzer White Ink

(Synthetic polymeric product containing inert pigments to obtain white prints on a wide range of fabrics.)

Appearance: White viscous paste.

Constitution: Titanium-di-oxide dispersed in a fortified polymeric system.

Description: Lyzer White Ink is recommended for obtaining white patterns by printing on polyester and its blend with cellulosic fibres without recourse to discharge or resist printing. The prints obtained have all round fastness properties with an extremely good texture.

Lyzer White Ink has excellent flow characteristics, one of the prime factors for trouble free printing without any chocking tendency. It is extremely suitable for roller, screen, auto screen and rotary printing for producing good prints with sharp outlines. It is offered as a ready to print paste and hence can be used directly to obtain prints with excellent whiteness or may be mixed with kerosene water emulsion in any desired proportion for obtaining subdued off white effects. Addition of LyzerBond Sigma brings about significant enhancement of fastness properties. In order to obtain coloured effects various pigment emulsions can also be added to Lyzer White Ink.

RECIPE:

LYZER WHITE INK: 97 parts
LyzerBond Sigma: 03 parts

Application involves printing the fabric with the above recipe, drying and finally subjecting the printed fabric to 140-150deg cen for 4 min. in order to obtain maximum fastness properties.

STORAGE: The product enjoys very good shelf life and warrants no particular storage conditions. However it is always advisable to have moderate conditions with the container being recapped tightly after use. Six months if stored below 30c

Packing:
30, 50 Kgs in Plastic Container.

(Without Warranty)
 
Note:
According to our best knowledge and technical experiments, the above data is true and accurate. Regarding to variety of consumption procedures, it is recommended to evaluate the information before use.

 

 

Copyright LYZERCHEM 2006. All Rights Reserved l Site Developed by Indiadekho Web Host & Designs